Any electricians/alarm technicians on here?

[Ric]

Had a power outage today (caused by a faulty washing machine), and when we put the power back on the house alarm goes off and won’t let us key in the code to turn it off. Had to switch that circuit off, but the kids bedrooms are on the same circuit. This is what the display shows. Any advice greatly appreciated!

 

[ganganvince]

Power down remove battery have a brew reconnect and reset may work.

Accenta G4 Rkp F131-01-111 On Display

Hi, Have just replaced Accenta LED RKP on my Optima Compact G4 panel for a Accenta LCD and all that comes up on LCD display on power up is Accenta G4 RKP F131-01-111. The alarm still arms and disarms Ok from RKP with my code. Is F131-01-111 an error code as thought the display should show welcome...

www.thesecurityinstaller.co.uk

 

[Ric]

Power down remove battery have a brew reconnect and reset may work.

Accenta G4 Rkp F131-01-111 On Display

Hi, Have just replaced Accenta LED RKP on my Optima Compact G4 panel for a Accenta LCD and all that comes up on LCD display on power up is Accenta G4 RKP F131-01-111. The alarm still arms and disarms Ok from RKP with my code. Is F131-01-111 an error code as thought the display should show welcome...

www.thesecurityinstaller.co.uk

This probably sounds pretty stupid, but we can't even locate where the main panel (and presumably the battery) is!

 

[Tuearts right boot]

BMs resident fire and burglary early warning technician will be along shortly

 

[Sir peace frog]

We've just had a power cut, in the heald green area, there was one last night, is that near you @Ric

 

[big phil]

This probably sounds pretty stupid, but we can't even locate where the main panel (and presumably the battery) is!

There should be a master code (might be called installers code?). Do you know who fitted it?

 

[Boo or Boo-urns]

Mine mysteriously tripped up last night around 3:30 am, jumped out of bed to switch off the din, then patrolled the perimeter of the house with a torch outside.

Crawled back into bed to wake up with all the clocks reset, a power cutoff was the culprit.

 

[Ric]

There should be a master code (might be called installers code?). Do you know who fitted it?

Sadly not, the previous owners had it installed :(

 

[big phil]

Sadly not, the previous owners had it installed :(

Did you find the panel yet? Should look something like the above, can’t imagine it’s too far from the keypad.

 

[ganganvince]

There should be a master code (might be called installers code?). Do you know who fitted it?

Default is 9999 but may have been changed on installation